Operating instructions/Installation instructions

Supervisor level
97
The network is no longer set up. A
new connection has to be estab-
lished in order to use the network
again.
– The WiFi is switched off
– The WiFi connection will be reset
to the factory default
WiFi setup
There are 2 possible connection meth-
ods.
WPS
 Activate the WPS function on your
router within 2minutes.
Tip: If the connection has not been set
up when the timeout has finished
counting down, repeat the process.
Soft AP
 Activate the function with the Miele
app on your smart device within
10minutes.
Tip: The app will guide you through the
remaining steps.
Network time
The date and time can be synchro-
nized over the network.
- Off
The date and time are not synchro-
nized over the network.
- As master
The machines are in a network but
are not connected to the Internet. A
machine is declared as the master
and sends data to the slave appli-
ances.
- As slave
The machines are in a network and
are connected to the Internet. All ma-
chines are configured as slaves. Data
is synchronized over the Internet.
Remote
Programs are selected on an external
terminal.
Factory default: On