Operating instructions/Installation instructions

Supervisor level
91
Program color allocation
You can assign a color to a Favorite
program. In the list of Favorites, each
Favorite program is given a colored
frame, which can be adjusted.
Factory default: On
Hygiene
The Maintenance Wash Hygiene pro-
gram is shown in the list of special
programs.
If a program at a temperature below
140°F (60°C) has been used, a request
to start the Maintenance Wash Hygiene
program appears in the display.
Factory default: Off
Expert code
A code has to be entered to cancel a
disinfection program. The code can be
modified.
The code is: 000
Make a note of your new code if you
ever change it.
Process technology
Anti-crease
The Anti-crease function helps prevent
creasing after the end of the program.
At the end of the program, the drum
continues to turn for up to 30minutes.
The door can be opened at any time
during the Anti-crease phase.
Factory default: On
Water level Min. iron
You can increase the water level for
the main wash in the Minimum
ironprogram.
- + 0mmwc (factory default)
- + 10mmwc
- + 20mmwc
- + 30mmwc
Water level Cottons
You can increase the water level for
the main wash in the Cottonspro-
gram.
- + 0mmwc (factory default)
- + 10mmwc
- + 20mmwc
- + 30mmwc