Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Switching on automatic dispensing
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Frequently asked questions
62
Problem Possible cause and solution
There is water next to
the capsule in the fabric
softener compartment.
The CapDosingsensor control was not activated or
an empty capsule was not removed at the end of the
last wash program.
Activate the CapDosingsensor control when a
capsule is next used.
Remove and then dispose of the empty capsule at
the end of each wash cycle.
The small pipe in the detergent drawer onto which
the capsule is placed is blocked.
Clean the small pipe.
The drum remains sta-
tionary but the program
keeps running.
Switch the washing machine off and then back on
with the button.
Note the message in the display.
Touch the Start/Stopsensor control.
The drum continues to spin and the program contin-
ues.