Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Switching on automatic dispensing
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Initial commissioning
23
Completing the commissioning
process
To complete the commissioning
process, the Normal program must be
run without laundry and without deter-
gent.
If the power is interrupted prior to the
start of the first wash program (e.g., if
the machine is switched off with the
sensor control), the initial commis-
sioning process can be completed
again.
Once a wash program has been run-
ning for over 20minutes, the initial
commissioning process does not have
to be performed again.
Turn on the faucets.
Touch the Programssensor control.
11:02
Whites
Minimum Iron
ExpressNormal
Delicates
Programs
Cottons Plus
Touch the Cottons Plussensor control.
11:02
60 °C 1500
1:07
Normal
h
Overview
Temperature Spin speed
Extras
not selected
Timer
CapDosing
rpm
not selected
Touch the Start/Stopsensor control.
When the program has finished, your
machine is ready for use.
If you have activated disinfection
programs, you must complete the
Thermal disinfectionprogram as the
first program; make sure you use a
suitable detergent but do not load
the machine.