Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Switching on automatic dispensing
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
103
FOC programs
In coin-box mode, you can decide
whether the Drain/Spin program can be
used for free.
Factory default: Off
Clear paid signal
The “Paid” signal in coin-box mode
can be applied until the end of the
program or discarded if the program is
not started after 5minutes.
Factory default: Off
Debounce time
The debounce time for the payment
signal can be adjusted.
- Short
For coin boxes. (Factory default)
- Long
For central control units.