Operating instructions/Installation instructions

Operation
66
Changing the microwave power level
Go to Settings| Recomm. power levels to
permanently set the recommended
power level to suit your personal
cooking preferences.
 Touch the microwave power level dis-
play.
 Change the microwave power level.
 SelectStart.
The programme will restart with the new
microwave power level.
Setting cooking durations
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even spoil.
Select as short as possible a time
until the cooking programme starts.
You have placed the food in the oven
compartment, selected an operating
mode and the required settings such as
the temperature.
By entering Duration, Finish at or Start at,
you can automatically switch the cook-
ing process off or on and off.
- Duration
Enter the required cooking duration
for the food. The heating will switch
off automatically once this duration
has elapsed. The maximum cooking
duration that can be set depends on
the operating mode that you have se-
lected.
- Finish at
Specify when you want the cooking
process to end. The oven heating will
switch off automatically at the time
you have set.
- Start at
This function will only appear in the
menu if you have set aDuration or Fin-
ish attime. WithStart at, you have to
specify when you want the cooking
process to start. The oven heating
will switch on automatically at the
time you have set.
 Select orTimer.
 Set the desired times.
 Confirm with OK.
For cooking programmes involving
steam, the cooking duration does not
begin until the set temperature is
reached.
If you are cooking at a temperature of
approx. 80°C or above, Steam reduc-
tion will appear in the display shortly
before the end of the cooking duration
and the door will automatically open a
little.
 Wait until Steam reduction goes out in
the display before opening the door
and removing the food from the oven
compartment.
A new cooking programme can only
be started if the automatic door re-
lease is retracted into its original po-
sition. Do not push it in manually as
this could damage it.