Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Description of functions
- Before using for the first time
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units
- Quick MW
- Popcorn
- Keeping warm function
- Steam reduction
- Recommended temps.
- Recomm. power levels
- Water hardness
- Movement sensor
- Safety
- Furniture front recognition
- Miele@home
- Remote control
- SuperVision
- Remote Update
- Software version
- Legal information
- Showroom programme
- Factory default
- Alarm + minute minder
- Main and sub-menus
- Operation
- Quick MW and Popcorn
- General notes on steam cooking
- Steam cooking
- Sous-vide (vacuum) cooking
- Special applications
- Rapid steam cooking
- Microwave defrosting and reheating
- Automatic programmes
- MyMiele
- User programmes
- Note for test institutes
- Cleaning and care
- Problem solving guide
- Optional accessories
- Service
- Installation
- Conformity declaration
- Copyrights and Licences
- Copyrights and licences for the communication module
Alarm + minute minder
61
Using the sensor control, you can set
a minute minder, e.g. for boiling eggs,
or an alarm for a specific time.
Using the Alarmfunction
The alarm can be used to specify a
particular time for a buzzer to sound.
Setting the alarm
If the Display| QuickTouch| Offsetting is
selected, you will need to switch the
steam oven on before setting the
alarm. The alarm time will then appear
in the display when the steam oven is
switched off.
Select the sensor control.
SelectAlarm.
Set the time for the alarm.
Touch Close to confirm.
When the steam oven is switched off,
the alarm time and will appear in-
stead of the time of day.
If you are cooking at the same time or if
you are in a different menu, the alarm
time and will appear at the top right-
hand side of the display.
At the specified time for the alarm,
will flash in the display next to the
time and a buzzer will sound.
Select the sensor control or the set
alarm time in the display.
The buzzer will stop and the symbols in
the display will go out.
Changing an alarm
Select the alarm in the display or se-
lect the sensor control and the de-
sired alarm.
The set alarm time appears in the dis-
play.
Set the new time for the alarm.
Touch Close to confirm.
The adjusted alarm time is now saved
and will appear in the display.
Deleting an alarm
Select the alarm in the display or se-
lect the sensor control and the de-
sired alarm.
The set alarm time appears in the dis-
play.
SelectDelete.
Touch Close to confirm.
The alarm will be deleted.