Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Description of functions
- Before using for the first time
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units
- Quick MW
- Popcorn
- Keeping warm function
- Steam reduction
- Recommended temps.
- Recomm. power levels
- Water hardness
- Movement sensor
- Safety
- Furniture front recognition
- Miele@home
- Remote control
- SuperVision
- Remote Update
- Software version
- Legal information
- Showroom programme
- Factory default
- Alarm + minute minder
- Main and sub-menus
- Operation
- Quick MW and Popcorn
- General notes on steam cooking
- Steam cooking
- Sous-vide (vacuum) cooking
- Special applications
- Rapid steam cooking
- Microwave defrosting and reheating
- Automatic programmes
- MyMiele
- User programmes
- Note for test institutes
- Cleaning and care
- Problem solving guide
- Optional accessories
- Service
- Installation
- Conformity declaration
- Copyrights and Licences
- Copyrights and licences for the communication module
Settings
58
Appliance list
All household appliances signed in to
the Miele@home System are shown.
Once you have selected an appliance,
you can access further settings:
- Display this appliance
– On
The SuperVisionfunction for this ap-
pliance is switched on.
– Off
The SuperVisionfunction for this ap-
pliance is switched off. The appli-
ance is still signed on to the
Miele@home system. Faults are
displayed, even if the
SuperVisionfunction for the appli-
ance has been switched off.
- Buzzer tones
You can select whether the buzzers
are switched on (On) or switched off
(Off) for this appliance.
Remote Update
The Remote Updatemenu option is
only displayed and can only be selec-
ted if the requirements for using
Miele@home have been met (see “Be-
fore using for the first time –
Miele@home”).
The RemoteUpdate function is used for
updating the software in your steam
oven. If an update is available for your
steam oven, it will automatically down-
load it. Updates will not be installed
automatically. They must be initiated
manually.
If you do not install an update, you can
continue to use your steam oven as
usual. However, Miele recommends in-
stalling updates.
Activating/deactivating
The RemoteUpdate function is activ-
ated as standard. Available updates will
be downloaded automatically but will
only be installed if you initiate installa-
tion manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.