Operating instructions/Installation instructions

Settings
33
Volume
Buzzer tones
If buzzers are switched on, a buzzer will
sound when the set temperature is
reached and at the end of a set time.
Melodies
At the end of a process, a melody will
sound several times in intervals.
The volume of the melody is represen-
ted by a bar with seven segments.
-       
Maximum volume
-       
Melody is switched off
Solo tone
At the end of a process, a continuous
tone will sound for a period of time.
The pitch of this continuous tone is rep-
resented by a segment bar.
-              
Maximum pitch
-              
Minimum pitch
Keypad tone
The volume of the tone that sounds
each time you touch a sensor control is
represented by a bar with seven seg-
ments.
-       
Maximum volume
-       
Tone is switched off
Welcome melody
The melody that sounds when you
touch the On/Off sensor control can
be switched on or off.
Units
Temperature
You can set the temperature in degrees
Celsius (°C) or degrees Fahrenheit (°F).