Operating instructions/Installation instructions

Operation
60
Pre-heating the oven compart-
ment
The Boosterfunction is used to quickly
pre-heat the oven compartment in
some functions.
The Pre-heatfunction can be used with
any oven function (except Eco Fan heat)
and has to be switched on separately
for each cooking programme.
If you have set a cooking duration, it will
only start to count down after the heat-
ing-up phase.
It is only necessary to pre-heat the oven
in a few instances.
 Pre-heat the oven compartment when
cooking the following food:
- Cakes and pastries with a short
cooking duration (approx. 30minutes
or less) as well as delicate items (e.g.
sponge) with the Conventional
heatfunction
Booster
The Boosterfunction is switched on as
the factory default setting for the follow-
ing functions (Further| Settings|
Booster| On):
- Fan plus
- Conventional heat
If you set a temperature above 100°C
and the Boosterfunction is switched on,
a rapid heating-up phase heats the
oven to the set temperature. The top
heat/grill element and the ring heater
element come on together with the fan.
Delicate items (e.g. sponge or bis-
cuits) will brown too quickly on the
top if the Boosterfunction is used.
Switch off the Boosterfunction for
these items.
Switching theBooster on and off for
a cooking programme
If you have selected the Booster| On
setting, you can switch off the function
separately for a cooking programme.
On the other hand, you can also switch
on the function separately for a cooking
programme if you have selected the
Booster| Off setting.
Example: you have selected a function
and the required settings such as the
temperature.
You want to switch off the Boosterfunc-
tion for this cooking programme.
 Select the sensor control.
 SelectBooster| Off.
 Confirm withOK.
The Boosterfunction is switched off dur-
ing the heating-up phase. Only the
heating elements associated with the
function are pre-heating the oven com-
partment.