Operating instructions/Installation instructions

Problem solving guide
155
Problem Cause and remedy
During operation an un-
usually large amount of
steam escapes, or
steam escapes from
parts of the oven where
it does not usually.
The door is not properly closed.
 Close the door.
The door seal is not correctly fitted.
 Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
 Replace the door seal.
This can be ordered from Miele (see the end of this
booklet for contact details).
The Start at and Finish at
functions are not avail-
able.
The temperature in the oven compartment is too
high, e.g. after a programme has finished.
 Open the door and let the oven compartment
cool down.
These functions are not generally available in main-
tenance programmes.
The sensor controls do
not respond.
You have selected the Display| QuickTouch| Off set-
ting. So when the steam oven is switched off, the
sensor controls do not respond.
 As soon as the steam oven is switched on, the
sensor controls will respond. If you want the
sensor controls to always respond even when the
steam oven is switched off, select the Display|
QuickTouch| Onsetting.
The steam oven is not connected to the power sup-
ply.
 Check that the steam oven power plug is correctly
inserted into the socket.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
 Touch and hold the On/Off control until the dis-
play switches off and the steam oven restarts.