Operating instructions/Installation instructions

Operation
55
Changing the temperature
You can permanently reset the recom-
mended temperature to suit your
cooking preferences by selecting Fur-
ther| Settings| Recommended
temperatures.
 Select the sensor control.
 Select Temperature and confirm with
OK.
 Change the desired temperature via
the navigation area.
 Confirm withOK.
The cooking programme will restart with
the new desired temperature.
Changing Moisture
 Select the sensor control.
 Select Moisture and confirm with OK.
 Change the moisture level.
 Confirm with OK.
The programme will continue to run at
the new moisture level.
Setting cooking durations
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
When baking, the cake mixture or
dough can dry out, and the raising
agents can lose their effectiveness.
Select as short as possible a time
until the cooking programme starts.
You have placed the food in the oven
compartment, selected an operating
mode and the required settings such as
the temperature.
By entering Duration, Finish at or Start at
via the sensor control, you can auto-
matically switch the cooking process off
or on and off.
- Duration
Enter the required cooking duration
for the food. The heating will switch
off automatically once this duration
has elapsed. The maximum cooking
duration that can be set depends on
the operating mode that you have se-
lected.
- Finish at
Specify when you want the cooking
process to end. The oven heating will
switch off automatically at the time
you have set.