Operating instructions/Installation instructions

Problem solving guide
157
General problems or technical faults
Problem Cause and remedy
The combination steam
oven cannot be
switched on.
The circuit breaker has tripped.
 Reset the trip switch in the circuit breaker box (see
data plate for minimum protection rating).
There may be a technical fault.
 Disconnect the combination steam oven from the
electrical supply for approx. 1minute by:
– Tripping the relevant mains fuse or unscrewing
the fuse completely, or
– Switching off the residual current device
 If, after resetting the trip switch in the mains fuse
box or the residual current device, the combination
steam oven will still not turn on, contact a qualified
electrician or the Miele Customer Service Depart-
ment.
The oven interior light-
ing is not working.
The lamp is defective.
 Call Miele Service to have the lamp replaced.
The control panel will
not open or close auto-
matically despite touch-
ing the sensor con-
trol several times.
Something is obstructing the control panel.
 Remove the obstruction.
The obstruction sensor is very sensitive, which
means the control panel sometimes does not open or
close.
 Open/close the control panel manually (see end of
this section).
 If the problem occurs frequently, contact the Miele
Customer Service Department.