Operating instructions/Installation instructions

User programmes
126
You can create and save up to 20 of
your own programmes.
- You can combine up to 9cooking
stages to accurately programme your
favourite or most frequently used re-
cipes. In each cooking stage, you
can select settings such as the func-
tion, temperature and cooking dura-
tion.
- You can enter the name of the pro-
gramme for your recipe.
When you call up and start your pro-
gramme again, it will run automatically.
There are different ways of creating a
user programme:
- At the end of an automatic pro-
gramme or special application, save
it as a user programme.
- Save a cooking programme after run-
ning it with a set cooking duration.
Then enter a programme name.
Creating user programmes
 Select User programmes.
 Select Create programme.
You can now specify the settings for the
first cooking stage.
Follow the instructions on the display:
 Select and confirm the settings you
want.
If you select the Pre-heatfunction, first
complete the first cooking stage. Use
Add cooking stage to then add another
cooking stage where you set a cook-
ing duration. Only then can you save
or start the programme.
 If required, selectFurther parameters to
switch theBooster and Crisp func-
tionfunctions on or off.
 Select Finish cooking stage.
All settings for the first cooking stage
have now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
 If additional cooking stages are re-
quired, select Add cooking stage and
proceed as per the first cooking
stage.
If you want to check the settings or to
change them at a later date, select the
cooking stage in question.