Operating instructions/Installation instructions

Operation
66
Cleaning the steam oven
 Remove the water container and
empty it as required.
 Switch the steam oven off.
Appliance rinsing appears after a cooking
programme involving steam.
 Follow the instructions on the display.
The rinsing process should be car-
ried out every time to flush any re-
maining food deposits out of the sys-
tem.
If you have selected Display| Quick-
Touch| Off in the settings menu, you
will have to switch the steam oven on
in order to open the door.
 Clean and dry the whole steam oven
as described in the “Cleaning and
care” chapter.
 Leave the appliance door open until
the oven compartment is completely
dry.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
- Temperature
- Moisture
- Duration
- Booster
- Pre-heat
- Crisp function
Changing the temperature and core
temperature
Go to Settings| Recommended temperat-
ures to permanently adjust the recom-
mended temperatures to suit your
cooking preferences.
The core temperature only ap-
pears if you are using the food probe
(see “Roasting – Food probe”).
 Touch the temperature display.
 Change the temperature and the
core temperature if necessary.
 Confirm withOK.
The cooking programme will restart with
the new desired temperatures.