Operating instructions/Installation instructions

Settings
55
RemoteUpdate
The RemoteUpdatemenu option is only
displayed and can only be selected if
the requirements for using
Miele@home have been met (see “Be-
fore using for the first time –
Miele@home”).
The RemoteUpdate function is used for
updating the software in your combina-
tion steam oven. If an update is avail-
able for your combination steam oven,
it will automatically download it. Up-
dates will not be installed automatically.
They must be initiated manually.
If you do not install an update, you can
continue to use your combination
steam oven as usual. However, Miele
recommends installing updates.
Activating/deactivating
The RemoteUpdate function is activ-
ated as standard. Available updates will
be downloaded automatically but will
only be installed if you initiate installa-
tion manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A message will appear in your combina-
tion steam oven display if a software
update is available.
You can install the update immediately
or postpone this until later. When the
combination steam oven is switched on
again, you will be reminded about the
update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the combination steam
oven off during the update. Other-
wise, the update will be aborted and
will not be installed.
- Some software updates can only be
carried out by the Miele Customer
Service Department.