Operating instructions/Installation instructions

Table Of Contents
Operation
64
Cleaning the combination steam
oven after a cooking process
Remove the water container and
empty it as required.
Switch the combination steam oven
off.
Appliance rinsing appears after a cooking
process involving steam.
Follow the instructions on the display.
The rinsing process should be car-
ried out every time to flush any re-
maining food deposits out of the sys-
tem.
Clean and dry the whole combination
steam oven as described in “Cleaning
and care”.
Leave the appliance door open until
the oven compartment is completely
dry.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
- Temperature
- Moisture
- Duration
- Booster
- Pre-heat
- Crisp function