Operating instructions/Installation instructions

Table Of Contents
Problem solving guide
171
Problem Cause and remedy
The sensor controls or
the proximity sensor do
not respond.
You have selected the Display| QuickTouch| Off set-
ting. When this is activated, the sensor controls and
proximity sensor do not respond when the steam
oven is switched off.
As soon as the steam oven is switched on, the
sensor controls and the proximity sensor will re-
spond. If you want the sensor controls and the
proximity sensor to respond even when the steam
oven is switched off, select the Display| Quick-
Touch| On setting.
The settings for the proximity sensor are switched
off.
Change the settings for the proximity sensor by
selecting Settings| Movement sensor.
The proximity sensor is defective.
Call the Miele Customer Service Department.
The steam oven is not connected to the power sup-
ply.
Check that the steam oven power plug is correctly
inserted into the socket.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
If the display does not respond, there is a fault with
the controls.
Touch and hold the On/Off control until the dis-
play switches off and the steam oven restarts.