Operating instructions/Installation instructions

Table Of Contents
Problem solving guide
168
Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the Miele Customer Service Department.
Information to help you rectify faults yourself can be found at www.miele.com/ser-
vice.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.
Messages in the display
Problem Cause and remedy
F10 The suction hose in the water container is not inser-
ted correctly or not vertical.
Correct the position of the suction hose:
F11
F20
The drain hoses are blocked.
Descale the steam oven (see “Care” in the “Clean-
ing and care” chapter).
If the fault message appears again, contact Miele
Service.
F44 There is a technical fault.
Turn the steam oven off and then back on again
after a few minutes.
If the same message appears again, contact the
Miele Customer Service Department.
F55 The maximum operating time for a cooking function
has been exceeded. This has triggered the safety
switch off device.
Switch the steam oven off and then back on again.
The steam oven is immediately ready for use again.