Operating instructions/Installation instructions

Guide to the appliance
21
Descaling tablets
For descaling the combination steam
oven
FlexiClip runners HFC71
The FlexiClip runners can be attached
to any shelf level.
Push the FlexiClip runners fully into
the oven compartment before placing
accessories on them.
The accessories will then automatic-
ally sit securely in between the stop-
pers at either end of each runner and
be prevented from sliding off.
The FlexiClip runners can support a
maximum load of 15kg.
Fitting and removing FlexiClip run-
ners
 Risk of injury caused by hot sur-
faces.
The combination steam oven gets
hot during operation. You could burn
yourself on the heater elements,
oven compartment or accessories.
Allow the heater elements, oven
compartment and the accessories to
cool before fitting or removing the
FlexiClip runners.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
should be fitted on the right.
When fitting or removing the FlexiClip
runners, do not extend them.
 Hook the FlexiClip runner onto the
front of the lower rail of a shelf
level(1.) and then push it along the
rail into the oven compartment(2.).