Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Building-in dimensions
- Dimensions of the furniture front
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture front
- Aligning the building-in niche
- Checking the building-in niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the furniture fronts
- Securing and aligning the furniture front
- Mounting the fixing bracket
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool
- Door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Automatic defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Storing food in the MasterFresh zone
88
The moisture regulator is used to regu-
late the amount of moisture in the hu-
midity-controlled compartment with
settings to.
Position of the moisture regulator
= slightly increased humidity
Select this setting if you store very
large quantities of fruit and vegetables
in the humidity-controlled compart-
ment. The moisture regulator partially
closes the vents in the compartment so
that some of the moisture present is re-
tained.
Position of the moisture regulator
= increased humidity
Select this setting if you store small
to large quantities of fruit and veget-
ables in the humidity-controlled com-
partment. The moisture regulator closes
the vents in the compartment com-
pletely so that all of the moisture
present is retained.
Tip: If the humidity level is too high and
a lot of moisture has collected in the
compartment, select the setting.
If the quantity of food being stored in
this compartment is small, the humidity
level may be too low. If you are only
storing a small amount of food, wrap it
in airtight packaging.
Increased humidity in the humidity-
controlled compartment can, in
some circumstances, cause a build-
up of condensate.
Wipe off any condensate with a
cloth.
Regulating the humidity level in the
humidity-controlled compartment
Slide the moisture regulator to the
left or right depending on the
setting required.