Operating instructions/Installation instructions

Selecting additional settings
65
Adjusting the temperature in
the MasterFresh zone (dry
compartment)
 In Settings mode, use the
and sensor controls to se-
lectMasterFresh and selectOK to
confirm your selection.
 Use the and sensor controls to
select the desired temperature and
touch OK to confirm your selection.
 Touch the sensor control if you
wish to terminate the process.
The segment bar displays 5 segments;
the temperature is adjusted in incre-
ments of approx. 1°C.
The factory default setting for the tem-
perature in the dry compartment is
0°C.
Switching Eco mode on or
off
Eco mode is useful when you go on holi-
day, for example, if you do not wish to
switch off the refrigeration appliance
completely or do not need a high de-
gree of cooling. Energy consumption in
Eco mode is lower than in normal opera-
tion.
The refrigerator section is thereby regu-
lated to a temperature of 6°C and the
dry compartment in the MasterFresh
zone to approx. 1°C.
If the SuperCool function is switched
on, this will be automatically switched
off when Eco mode is selected.
 In Settings mode, use the  and
sensor controls to select Eco mode
and select OK to confirm your selec-
tion.
 Use the  and sensor controls to
switch the Eco mode On or Off and se-
lect OK to confirm your selection.
Only the changed temperature on the
display indicates that Eco mode is
switched on.
Tip: You can also switch off the Eco
mode function by directly adjusting the
temperature (see “The correct tem-
perature – Setting the temperature”).
Storing food at a temperature of 6°C
for an extended period of time may
impair the shelf life and quality of the
food.