Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Building-in dimensions
- Dimensions of the furniture front
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture front
- Aligning the building-in niche
- Checking the building-in niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the furniture fronts
- Securing and aligning the furniture front
- Mounting the fixing bracket
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool
- Door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Automatic defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Guide to the appliance
54
Settings mode
In Settings mode, you can select the following appliance functions and alter their
settings to some extent:
Symbol Function
Language Set
Display brightness Adjust (darker to brighter)
Colour scheme Set (dark or bright)
/ Buzzer tones Adjust the volume or switch off the Buzzer tones
completely (e.g. for the door alarm)
/
Keypad tone Adjust the volume or switch off the Keypad tone
completely
°F/°C Temperature unit Set (°Fahrenheit or °Celsius)
/ Keypad lock Switch on or off
(see “Selecting additional settings”)
MasterFresh Adjust the temperature in the dry compartment
(see “Selecting additional settings”)
Eco mode Switch on or off
(see “Selecting additional settings”)
Self test The system restarts and is checked for faults or
malfunctions
(see “Selecting additional settings”)