Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Building-in dimensions
- Dimensions of the furniture front
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture front
- Aligning the building-in niche
- Checking the building-in niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the furniture fronts
- Securing and aligning the furniture front
- Mounting the fixing bracket
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool
- Door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Automatic defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Installation
*INSTALLATION*
30
Securing with a wooden wedge
Secure the building-in niche to the
wall behind it and/or above it as re-
quired using the anti-tip brackets.
Pushing the refrigeration appliance
into the building-in niche
Take care not to damage the elec-
trical connection whilst pushing the
refrigeration appliance into the build-
ing-in niche.
If you are installing several refrigera-
tion appliances side by side, now se-
cure the appliances to one another
(see the installation instructions for the
side-by-side installation kit).
To ensure that the refrigeration appli-
ance can then be aligned correctly,
the plinth ventilation grille must be re-
moved from the appliance plinth:
Carefully guide a flat-head screw-
driver through the plinth ventilation
grille on both sides and use it to
push the internal plastic latches out-
wards to release the plinth ventilation
grille.
Place the plinth ventilation grille to
one side.