User manual

Guide to the appliance
35
Moving the bottle rack
The bottle rack can be placed at differ-
ent positions in the refrigeration appli-
ance.
 Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to pre-
vent bottles from touching the back of
the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
Using the bottle rack in the dividing
plate
In the dividing plate, either the bottle
rack or the glass shelf can be used.
 Remove the glass shelf at the back of
the dividing plate and keep it in a safe
place.
 Place the bottles as far back as pos-
sible with the bases at the back of
the appliance.
Tip: If the bottles hang over the edge of
the bottle rack, adjust the bottom bottle
shelf by moving it upwards.
Removing and reinserting the organ-
isation box
The additional organisation box in the
PerfectFresh Active zone makes it
easier for you to organise your food.
 Lift the box at the rear first when you
want to remove it.
 To reinsert the organisation box in the
drawer, place the front section in first.