User manual

Cleaning and care
61
Removing the drawers and glass
shelves on telescopic runners
The magnet on the drawer is import-
ant for the proper functioning of the
ice cube maker.
Do not remove the magnet.
 Pull out the drawer as far as it will go
and then lift it up and out.
Push the telescopic rails back in
again to avoid damaging them.
 Pull the glass shelf and telescopic
runners out.
 To remove the telescopic runners:
1. Push the catch upwards.
2. Push the telescopic runner to the
side.
3. Then pull the telescopic runner off to
the rear.
 Pull off the protective trim at the front
and back of the shelf.
 After cleaning the shelf, reattach the
protective trim.
 To attach the telescopic runners to
the shelf:
1. Hook the telescopic runner on at the
rear.
2. Then clip the catches into position at
the front.
Replacing the drawer
 Insert the glass plate together with
the telescopic runners in the freezer
zone.
 Slide the drawer onto the fully retrac-
ted telescopic runners.