User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Selecting further settings
- Explanation of the different settings
- Party mode
- Switching the lock function / on
- Deactivating the lock function / temporarily
- Switching the lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and buzzers /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Explanation of the different settings
- Temperature and door alarm
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and licences
Problem solving guide
62
Message Cause and remedy
is lit up red in the
temperature display and
an alarm is also sound-
ing.
The temperature alarm has been activated; the tem-
perature in the freezer section has risen higher or
fallen lower than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– A large quantity of fresh food has been placed
in the freezer without the SuperFreeze function
being switched on.
– A prolonged power cut (mains outage) has oc-
curred.
– The refrigeration appliance has a fault.
Tap
.
The alarm message is confirmed:
goes out and
the alarm stops.
The warmest temperature recorded in the refrigera-
tion appliance will flash for about 1minute in the dis-
play. Then the temperature display will change to the
current temperature.
You can exit from the flashing temperature display
early:
Touch the temperature display.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.