User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Selecting further settings
- Explanation of the different settings
- Party mode
- Switching the lock function / on
- Deactivating the lock function / temporarily
- Switching the lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and buzzers /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Explanation of the different settings
- Temperature and door alarm
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and licences
Cleaning and care
53
Cleaning accessories by hand
or in the dishwasher
The following components must be
cleaned by hand only:
- All drawers
- Telescopic runners and protective
trim
(on the glass shelves)
The following components are dish-
washer-safe:
Risk of damage due to high dish-
washer temperatures.
Parts of the refrigeration appliance
may become unusable, e.g. deform,
if they are washed in the dishwasher
at more than 55°C.
For dishwasher-safe components, al-
ways select dishwasher programmes
with a maximum temperature of
55°C.
Contact with natural dyes from car-
rots, tomatoes and ketchup, etc., may
discolour the plastic parts in the dish-
washer. This discolouration does not
affect the stability of the parts.
- The ice cube tray
- The glass shelves
Removing and dismantling ac-
cessories for cleaning
Removing the top drawer and glass
shelf
Pull the drawer out as far as it will go.
Tilt the drawer slightly upwards and
remove the drawer upwards at an
angle.
Pull out the glass plate together with
the guide rails.
Pull the guide rails off to the side.
After cleaning, reattach the guide rails
to the glass plate.
Replacing the top drawer
Insert the glass plate together with
the guide rails in the freezer zone.
Place the drawer on the guide rails
from an angle at the top and push the
drawer all the way in.