User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Selecting further settings
- Explanation of the different settings
- Party mode
- Switching the lock function / on
- Deactivating the lock function / temporarily
- Switching the lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and buzzers /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Explanation of the different settings
- Temperature and door alarm
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and licences
Guide to the appliance
29
Start display
The touch display can be scratched by pointed or sharp objects, e.g. pens.
Only touch the display with your fingers.
If your fingers are cold, the touch display may not react.
-18
°C
1
2
3
4
a
Temperature display for freezer section
b
Settings mode
sensor control for adjusting various settings in Settings mode
c
Display for Miele@home connection status
(only visible when the Miele@home function has been set up)
d
Demo mode display
(only visible when the Demo mode function has been switched on)
Using the appliance
Touch the area/symbol you want on the start display.
Swipe left or right across the display until the value/symbol you want is shown in
the middle.
Tap on the option you want on the display to confirm.
The selected value/symbol will light up orange (except for a few exceptions).
To leave the Settings level, tap on or OK.