Operating and Installation instructions

Installation
*INSTALLATION*
87
 Remove the cap from the solenoid
valve.
 Insert the adapter into the union
nut.
 Risk of damage!
Do not insert the water filter the
wrong way around, as this can cause
damage.
 Insert the water filter with the de-
pression facing downward toward the
adapter.
 Risk of damage!
Do not overtighten the union nut, as
this can cause damage.
 Connect the union nut to the sole-
noid valve, and tighten it.
 If you want to divert the water line by
90°, screw on the elbow.
In case of a water line with a 1/4"
thread:
 Connect the water line (e.g., cop-
per) to the adapter or elbow us-
ing the clamping ring and nut.
In case of a water line with a 7/16"-24
UNS thread:
 Connect the water line directly to
the adapter or elbow (a clamp-
ing ring and nut are not re-
quired).
 Secure the water line to the casing
using the retaining clip.
 Slowly open the faucet in the water
supply line and check the whole wa-
ter system for leaks.
 The appliance can now be connected
to the power supply (see “Electrical
connection“).
When pushing the appliance into the
niche, do not bend or damage the
water line.
 Push the appliance into its final posi-
tion.