Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Selecting additional settings
- Freezing and storing food
- Adjusting the interior fittings
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently asked questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinges
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Water connection
- Electrical connection
Frequently asked questions
53
Problems with the ice cube maker
Problem Possible cause and solution
You cannot turn the ice
cube maker on.
The appliance is not connected to the power supply
or is not switched on.
Reconnect to the power supply and switch the ap-
pliance back on.
The ice maker is not
producing any ice
cubes.
The appliance and/or the ice maker is not turned on.
Turn on the appliance and/or the ice maker.
The water intake is not open or has not been vented.
Open the water intake.
Check that the water supply has been vented.
The ice maker drawer is not closed properly.
Push the drawer all the way in.
The appliance door has been opened too frequently,
causing the compressor to turn on more frequently
and the ice maker to ice up.
Only open the door when necessary and for as
short a time as possible.
The temperature in the freezer zone is too high.
Select a lower temperature.
The water pressure is too low.
The water pressure must be between 121 and
87psi (1.5 and 6bar).
Remember that it can take up to 24hours for the
production of ice cubes to commence.
The ice cube maker is
only producing small
ice cubes.
The size of the ice cubes depends on the quantity of
water supplied. You are able to set this quantity as
required.
To make larger ice cubes, increase the amount of
water supplied to the ice cube maker.