Operating and Installation instructions

Cleaning and care
45
Setting the cleaning position
This setting can only be selected if the
ice cube maker is on.
 Empty the ice cube drawer.
 Touch the settings button.
All symbols available for selection will
appear on the display and the sym-
bol will flash.
 Touch the buttons for setting the tem-
perature ( and ) repeatedly until
the symbol for the ice cube maker 
flashes on the display.
 Touch the OK button to confirm your
selection.
 By touching the and buttons,
you can now select the setting you
want:
0:The ice cube maker is switched off
1:The ice cube maker is switched on
2:Set the water volume
3:Select the ice cube tray cleaning
position
4:Rinse the ice cube maker
 Touch the OK button to confirm your
selection.
The selected setting is saved and you
will hear the ice cube tray moving into a
slanted position.
 Wait until the ice cube tray has
stopped moving before continuing.
The ice cube maker will then switch off.
The symbol for the ice cube maker
will disappear from the display.
 Remove the ice cube drawer.
The ice cube tray cannot be removed
and must be cleaned in place.
 Clean the ice cube tray and the ice
cube drawer with lukewarm water
and liquid dish soap. Wipe thoroughly
with clean water and dry with a cloth.
As soon as the ice cube maker is
switched on, the ice cube tray rotates
back to its original position.