Operating and Installation instructions

Cleaning and care
44
You will hear the ice cube tray turning to
a slanted position.
 Wait until the ice cube tray has
stopped moving before continuing.
The ice cube maker will then switch off.
 Carefully remove the ice cube drawer,
which is now full of water. Empty and
clean it.
The ice cube tray cannot be removed
and must be cleaned in situ.
 Dry the ice cube tray with a cloth.
As soon as the ice cube maker is
switched on, the ice cube tray rotates
back to its original position.
Cleaning the ice cube tray
Clean the ice cube tray:
- Before switching off the ice cube
maker for a long period of time
- Regularly, to remove ice and water
residues.
If you have already selected the set-
ting “Rinse the ice cube maker” (see
“Rinsing the ice cube maker”), the ice
cube tray will already be in the clean-
ing position.
The ice cube tray cannot be re-
moved and must be cleaned in situ. For
this reason the ice cube tray must be
set to the cleaning position.