Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
- Installation
- Location
- Climate range
- Ventilation
- Top ventilation gap
- Furniture door panel
- Horizontal and vertical gaps
- – Horizontal gap
- – Vertical gap
- Weight of the furniture door
- Fitting large or divided furniture doors
- Before installing the appliance
- Does your old appliance have a different hinging mechanism?
- Stainless steel front
- Building-in dimensions
- Changing the door hinging
- Installing the appliance
- Electrical connection
- Installation
Warning and Safety instructions
7
The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety re-
quirement is met. If in any doubt please have the electrical installa-
tion tested by a qualified electrician.
Reliable and safe operation of this appliance can only be assured
if it has been connected to the mains electricity supply.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
Do not connect the appliance to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
If moisture gets into electrical components or into the mains con-
nection cable, it could cause a short circuit. Therefore, do not oper-
ate this refrigeration appliance in areas which are exposed to mois-
ture (e.g in a garage or utility room).
This appliance must not be used in a non-stationary location (e.g.
on a ship).
Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
For safety reasons, this appliance may only be used after it has
been built in.
The appliance must be isolated from the electricity supply during
installation, maintenance and repair work.
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.