Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
- Installation
- Location
- Climate range
- Ventilation
- Top ventilation gap
- Furniture door panel
- Horizontal and vertical gaps
- – Horizontal gap
- – Vertical gap
- Weight of the furniture door
- Fitting large or divided furniture doors
- Before installing the appliance
- Does your old appliance have a different hinging mechanism?
- Stainless steel front
- Building-in dimensions
- Changing the door hinging
- Installing the appliance
- Electrical connection
- Installation
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
64
Whilst counterholding the adjusting
bolts with a screwdriver, tighten
the nuts with a spanner.
The cover strip must be com-
pletely hidden in the niche and must
not protrude.
Open the cover.
Fit the screws into the holes.
Tip: Pre-drill the holes.
Risk of damage to the fixing
bracket and cover.
The cover on the fixing bracket can
easily become detached.
Always close the cover as soon as
you have finished working on the
bracket.
Close the door.