Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
- Installation
- Location
- Climate range
- Ventilation
- Top ventilation gap
- Furniture door panel
- Horizontal and vertical gaps
- – Horizontal gap
- – Vertical gap
- Weight of the furniture door
- Fitting large or divided furniture doors
- Before installing the appliance
- Does your old appliance have a different hinging mechanism?
- Stainless steel front
- Building-in dimensions
- Changing the door hinging
- Installing the appliance
- Electrical connection
- Installation
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
62
Place the furniture door with the outer
side downwards on a stable surface.
Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
Hang the fixing bracket with the
fitting aids onto the inside of the fur-
niture door. Align the fixing bracket
centrally.
Attach the fixing bracket securely us-
ing at least 6 short chipboard
screws. (On cassette doors only
use 4 screws on the edges).
Tip: Pre-drill the holes.
Pull the fitting aids upwards to re-
move them.
Turn them around and fit them into
the middle slots on the fixing bracket
for safe keeping.
Slide the side cover onto the fixing
bracket on the side opposite the
hinge.
Turn the furniture door over and at-
tach the handle (if required).