Operating instructions/Installation instructions

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
61
Fitting the furniture door
If fitted in a run of units make sure that
the top edge of the furniture door is at
the same height as neighbouring unit
doors.
The furniture door must be fitted cor-
rectly and not under tension.
The next section gives instructions on
how to fit a furniture door that is at
least 16–19 mm thick.
 The distance between the appliance
door and the fixing bracket is set to
8mm at the factory. Check this dis-
tance and adjust it if necessary.
 Push the fitting aids up to the
height of the furniture door: the lower
edge X of the fitting aids must be at
the same height as the upper edge of
the furniture door being fitted (see
in diagram).
Tip: Push up the fitting aids with the
furniture front until they are at the same
height as the doors of adjacent kitchen
units.
 Undo the nuts and take the fixing
bracket off together with the fitting
aids.