Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
- Installation
- Location
- Climate range
- Ventilation
- Top ventilation gap
- Furniture door panel
- Horizontal and vertical gaps
- – Horizontal gap
- – Vertical gap
- Weight of the furniture door
- Fitting large or divided furniture doors
- Before installing the appliance
- Does your old appliance have a different hinging mechanism?
- Stainless steel front
- Building-in dimensions
- Changing the door hinging
- Installing the appliance
- Electrical connection
- Installation
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
60
Snap off any protruding ends from
the fixing brackets. They are no
longer required and can be disposed
of.
Replace covers and on the fix-
ing brackets.
Only for an appliance with a niche
height greater than 140cm
To enhance the stability of the appli-
ance in the unit, push the rods supplied
in underneath the appliance between it
and the floor of the housing unit:
First secure the handle to one of
the stabilising rods.
Push the stabilising rod into the
guide hole as far as it will go. Remove
the handle, fit it to the other rod
supplied and push this into its guide
as far as it will go.
Tip: Keep the handle somewhere safe
in case you ever need to fit the appli-
ance into a new housing unit.
Close the appliance doors.