Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
- Installation
- Location
- Climate range
- Ventilation
- Top ventilation gap
- Furniture door panel
- Horizontal and vertical gaps
- – Horizontal gap
- – Vertical gap
- Weight of the furniture door
- Fitting large or divided furniture doors
- Before installing the appliance
- Does your old appliance have a different hinging mechanism?
- Stainless steel front
- Building-in dimensions
- Changing the door hinging
- Installing the appliance
- Electrical connection
- Installation
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
56
With 16mm thick unit walls only:
Clip spacers and on the right-
hand side of the hinges.
Open the appliance door.
Remove the cover.
Loosely fit the connecting bracket
using the screws.
Tip: Do not tighten the screws so that
you can adjust the position of the con-
necting bracket.
Fit the stopper onto the fixing
bracket.
Loosely fit the fixing bracket using
the screws.
Tip: Do not tighten the screws so that
you can adjust the position of the con-
necting bracket.