Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
- Installation
- Location
- Climate range
- Ventilation
- Top ventilation gap
- Furniture door panel
- Horizontal and vertical gaps
- – Horizontal gap
- – Vertical gap
- Weight of the furniture door
- Fitting large or divided furniture doors
- Before installing the appliance
- Does your old appliance have a different hinging mechanism?
- Stainless steel front
- Building-in dimensions
- Changing the door hinging
- Installing the appliance
- Electrical connection
- Installation
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
55
Risk of damage to the fixing
bracket and cover.
The cover on the fixing bracket can
easily become detached.
Always close the cover as soon as
you have finished working on the
bracket.
Loosely screw the fixing brackets
into the pre-drilled holes in the appli-
ance door using hex screws.
Tip: Secure a pair of fixing brackets in
the handle area of the door.
Close the covers.
Push the appliance two thirds of the
way into the building-in niche. When
pushing the appliance into its niche,
make sure that the mains cable does
not get trapped.
Tip: To help you push it into position, tie
a piece of string around the plug to
“lengthen” the power cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the ap-
pliance is in the unit.