Operating instructions/Installation instructions

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
52
 Hang appliance door  onto pre-fit-
ted screws  and , and tighten
screws  and  securely.
 Replace covers ,  and .
 Refit the locking pins into the top of
the hinges to prevent the doors open-
ing too far.
Installing the appliance
Two people are required for installing
the appliance.
 Install the appliance in a stable, solid
housing unit, positioned on an even
and level floor.
 Secure the housing unit against tip-
ping.
 Use a spirit level to align the housing
unit. The corners of the housing unit
must be at 90° angles to each other,
otherwise the door will not sit straight
on all 4corners.
 The required ventilation gaps must be
provided (see “Installation” – “Install-
ation notes”).