Operating instructions/Installation instructions

Problem solving guide
39
Message Cause and remedy
The power failure
and symbols appear
in the display and the
alarm sounds.
The temperature display
will also show the
warmest temperature
recorded in the freezer
during an interruption to
the power supply or a
power cut.
The temperature in the appliance in the previous days
or hours has risen too high because of a power cut or
interruption to the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
 Press the Alarm off button.
The warmest temperature display will go out. The dis-
play will then revert to showing the actual temperature
in the freezer.
 Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if it is, use it as soon as
possible. Defrosted food may only be re-frozen
after it has been cooked.
The symbol lights up
in the display, the appli-
ance does not get cold,
although the appliance
controls are working.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Contact the Miele Service Department for informa-
tion on deactivating Demo mode.