Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature and door alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
52
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
Lift off the covers, and.
Slightly loosen screws and on
the hinges.
Push the appliance door outwards
and take it off its hinges.
Remove the screws completely
and loosely screw them in on the op-
posite side.
Remove the screws completely
and loosely screw them in on the op-
posite side.