Operating and Installation instructions

Table Of Contents
Frequently asked questions
Problem Possible cause and solution
 appears unexpect-
edly in the display and
is flashing at the
same time. The audible
signal might also be
sounding.
The oven has been operating for an unusually long
period of time, and this has activated the safety shut-
off.
Turn the mode selector toOff. The oven is ready
for use again immediately.
 appears on the dis-
play.
The door lock for the Self Clean program has not
locked.
Turn the mode selector to Off and select the Self
Clean program again.
If the problem persists, contact Miele Customer
Service.
  appears on the dis-
play.
The door lock for the Self Clean program has not
opened.
Turn the mode selector to Off and switch the oven
off.
If the problem persists, contact Miele Customer
Service.
and a fault code not
listed here appear on
the display.
A fault has occurred that you cannot resolve.
Contact Miele Customer Service.
A noise is heard after
the cooking process is
complete.
After the cooking process the cooling fan will
continue to run for a while after a program is
complete to prevent moisture from building up in
the oven, on the control panel or surrounding
cabinetry.
The cooling fan will turn off automatically.
The oven has turned it-
self off.
To save power, the oven turns off automatically if a
button is not pressed after a certain amount of time
or after a cooking program has ended.
Turn the oven back on.
73