Operating and Installation instructions

Table Of Contents
Cleaning and care of the oven
65
Preparing for Self Clean
Accessories that are not suitable for
the Self Clean program will be
damaged by the high temperatures.
Remove all accessories that are not
suitable for the Self Clean program
from the oven compartment before
starting the Self Clean process. This
also applies for optional accessories
that are not suitable for the Self
Clean program.
The following accessories are suitable
for the Self Clean program and can be
left in the oven compartment during the
process:
Side runners
FlexiClips with Wire Rack
HFCBBR30-3
Wire rack HBBR30-2
Remove all accessories that are not
suitable for the Self Clean program
from the oven.
Slide the wire rack into the top shelf
level.
Coarse soiling in the oven
compartment can cause thick smoke
to develop.
Burnt-on residues can cause lasting
discoloration or dull spots on
enameled surfaces.
Before starting the Self Clean
program, remove coarse soiling from
the oven compartment and scrape
any burnt-on residues off enameled
surfaces with a glass scraper.
Starting Self Clean
Danger of burning!
The front of the oven gets hotter in
the Self Clean program than it does
in normal oven modes.
Do not let children touch the
appliance during the Self Clean
program.
Select the Self clean
(Clean)operating mode.
  appears. The number will flash.
Use or to choose between the ,
, and  Self Clean levels.
Select the desired Self Clean level.
Confirm with OK.
The Self Clean program will start.
will also appear in the display.
While is flashing, the door is locked
automatically. lights up as long as it
is locked.
The oven heating and the cooling fan
will then turn on automatically.
The oven interior lighting will not come
on during the Self Clean program.