Operating instructions/Installation instructions

Operation
28
Switching on during a power outage
If there is an interruption to the electri-
city supply, the gas can be ignited
manually, e.g. with a match.
 Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
 Hold the control pressed in and light
the gas at the burner with a match.
 Keep the control pressed in for a fur-
ther 5-10seconds and then release it.
Adjusting the flame
The burners can be regulated at any
level between the strongest and weak-
est flame.
As the outer part of the flame is much
hotter than the centre, the tips of the
flames should stay beneath the pan
base. Flame tips which extend beyond
the sides of the pan merely warm up
the air in the room and can also dam-
age pan handles and increase the
danger of injury.
 Adjust the flame so that it does not
spread out beyond the sides of the
pan.
Wok burner
Depending on the type of control knob,
there may be a stopper between the
low and high settings at the 6 o'clock
position.
 Press the control knob down lightly to
move past this resistance.