Operating instructions/Installation instructions

Cleaning and care
35
Assembling the small, medium and
large burners
 Place the burner head onto the
burner base so that the thermo-
couple, the ignitor and the re-
taining pins fit into their respective
holes in the burner head.
 Position the burner cap onto the
burner head so that the retaining
pins fit into their respective recesses.
Gently twist the burner cap clockwise
or anti-clockwise until it locks into
position. When correctly positioned,
the burner cap will not slide about.
Ensure parts are reassembled in the
correct order.
Assembling the wok burner
 Place the burner head on to the
burner base so that the thermo-
couple and the ignitor extend
through their respective holes in the
burner head.
 Replace the burner ring.
 Replace the burner cap.
Ensure parts are reassembled in the
correct order.