Operating instructions/Installation instructions

Nosteamisbeingproduced.
Theindicatorlight Q for"Steam"goesoutwhileironing.
Possiblefault Solution
Theirontemperatureistoolowfor
steamproduction.
Setthetemperatureselectorto ßßß and
waituntilthedisplaylightcomeson.
Nosteamisbeingproduced.
Theindicatorlight Q for"Steam"goesoutwhileironing,andtheindicator
a for"Waterempty"isred.
Possiblefault Solution
Thewaterreservoirisempty. Fillthewaterreservoir.
Thesteamnozzlesaresputtering.
Possiblefault Solution
Cleantapwaterwasnotused. Emptythesteamreservoir,rinseitout,then
fillwithtapwater(see"CleaningandCare").
Thesteamnozzlesarenotreleasingenoughwater.
Solution Solution
Therearelimedepositsinthewater
reservoir,fromhardwater.
Toremovetheselimedeposits,rinsethe
reservoirundertapwater(see"Cleaning
andCare").
Frequentlyaskedquestions
33