Operating instructions/Installation instructions
Table Of Contents
- Contents
- Notes about these instructions
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Caring for the environment
- Initial commissioning
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program chart
- Cleaning and care
- Frequently asked questions
- Miele Service
- INSTALLATION INSTRUCTIONS
- Electrical connection
- Plumbing
- Technical details
- Settings
- Opening the Settings menu
- Changing settings
- Language
- Time of day
- Water hardness
- Rinse Aid
- Temperature unit
- High-temperature final rinse
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Consumption (EcoFeedback)
- Display brightness
- Volume
- Memory
- Refill reminders
- AutoOpen
- BrilliantLight (depending on model)
- Software version
- Showroom program
- Factory default
- Sound emission tests
Cleaning and care
68
Cleaning the drain pump
If water remains in the wash cabinet af-
ter the end of a program, the water has
not been pumped away. The drain
pump may be blocked by foreign ob-
jects. These foreign objects are easy to
remove.
Disconnect the dishwasher from the
power supply.
To do this, turn off and unplug the
dishwasher.
Take the filter combination out of the
wash cabinet (see “Cleaning the fil-
ters” under “Cleaning and care”).
Scoop the water out of the wash cab-
inet using a suitable small container
or utensil.
Press the catch of the drain pump
cover inwards.
Tip the cover inwards until it is re-
leased.
Rinse the cover thoroughly under run-
ning water and remove all foreign ob-
jects.