Installation plan

en - Installation notes
4
Installation notes
For safe installation and commissioning of the dishwasher please
read the installation plan, the service documentation, the installa-
tion diagram, and the operating instructions.
This installation plan includes the dimensions of the appliance, the
technical data, and the requirements to be met on site for the installa-
tion of the dishwasher.
Installation re-
quirements
Installation and commissioning work should be performed by a quali-
fied and trained service technician in accordance with local and na-
tional safety regulations.
Installation must comply with all local codes and regulations.
Surrounding area
Condensate can build up in the area surrounding the dishwasher. Any
cabinetry and fittings in the room must, therefore, be suitable for this
purpose.
Vapor-barrier film
for built-in appli-
ances
The vapor-barrier film supplied with the dishwasher protects the
countertop from damage caused by steam when the door is opened.
Attach the vapor-barrier film above the door, underneath the counter-
top.
Electrical connec-
tion
All work on the electrical connection should be carried out by Miele
Customer Service, an authorized Miele dealer, or a qualified electri-
cian.
Plug connection
The dishwasher should be connected to the electricity supply via an
electrical outlet.
Hard-wired
If the dishwasher is hard-wired to the power supply, a circuit breaker
capable of disconnecting the dishwasher at all poles must be in-
stalled on site. This power switch must have a contact gap of at least
1/8" (3mm).
The electrical socket outlet and the circuit breaker must be accessi-
ble after the appliance has been installed. This is to enable an elec-
trical safety test to be carried out after installation and after any ser-
vicing work.
The power cord must be laid protected from the risk of thermal dam-
age.
Equipotential
bonding and
grounding
This machine must be grounded in accordance with local code.